This is the UK's fastest selling interlocking block solution.

Used in a wide variety of applications and easily installed (or moved) with no foundations required, the blocks weigh 750 kgs each, are 0.54m2 in face area and are lifted via an integral 'cast' in lifting pin.

The speed of construction is a key feature - two men can comfortably install 228 blocks per day which is over 123m2.

A standard articulated lorry carries 38 blocks although we are happy to deliver any number including single blocks.

The 'V' Interlocking block is the next generation of interlocking block technology.

The large blocks weigh 1600 kgs and as with the Interlocking blocks they require no specific foundations details.

Each block has a face area of 1.12m2 and therefore speed of construction is even more impressive with 250m2 being comfortably achieved by two men per day.

A standard artic carries 18 blocks and as with the Interlocking blocks any number of blocks can be delivered.

The high quality solution to your cable protection requirements.

The covers are available in a range of sizes and the motif/cast in identification can be tailored to suit individual customer requirements.

Weighing in at 2000 kgs these blocks are the ideal answer to the question of how to secure your premises against un-wanted visitors.

They can be lifted into position via the cast in lifting pin, the integral fork slots or via 'hi-ab' type clamps.

By special request we can eliminate the fork slots and lifting pin to give ultimate post installation peace of mind.

Other uses for these blocks include fall arrest anchors, counterweights and HGV test weights.

Available in two part or four part configuration these units are manufactured to BS 5911-3 and are offered in a wide range of sizes.

The four part units weigh in at less than 25 kgs for each section.

They eliminate the need for bricklayers on site and are the quickest way to achieve the final level for cover and frame.

The quick answer to costly brickwork, gully covers/raisers are all manufactured to BS 5911-6 and are available in either square or u-shapedconfiguration.

Thickness's are 65mm or 100mm depending on site requirements.